User Guide
Quick start
- Open Repeaters, Hotspots or All Systems to see connected equipment and live talkgroups. No setup is needed to watch.
- For your own Operator Console, open Settings and enter your exact connected hotspot/repeater ID, including its SSID. Add your operator DMR ID only if you want to filter a shared connection's calls.
- To control Dial, enter the same KEY configured in your equipment's Options string. The Options Generator can create that string; apply it to your client and reconnect first. Never enter a server API key.
- Opt in to saving connection settings if you want the Operator Console and header Dial panel to use them across pages. Without saving, use Connection Control for commands on that page only.
- Select the slot and talkgroup, then Link. My connection shows the reported Dial TG for each slot. Allow up to 75 seconds after command acceptance for confirmation; do not repeat a command just because reporting has not caught up.
- Use Display settings for theme, text size, contrast and UTC/local time. Saving appearance preferences is a separate, optional choice.
The sections below provide the full reference, including reporting limitations, controls and privacy settings.
Language
Language (A/文). Language applies to Console labels, not radio content or voice announcements. It is saved only when Save Settings is enabled. Settings
Reading the console
The default front page shows connected repeaters below current group voice calls. The sysop may choose another starting view. Repeaters, Hotspots and All Systems offer a live View selector: Compact, All or Hidden. Hidden keeps the section heading visible; Compact shows two complete rows; All fits the entries without scrolling the panel. Individual cells keep a fixed height; long content can be scrolled within a cell. Identity details open separately without resizing the cell. New calls appear after three seconds. At the end, the duration stops and the call is marked Completed for five seconds. If the TG resumes during that hold, the same cell updates immediately. Calls without an END report expire after 180 seconds. These changes appear on the next report refresh. Calls already underway when the console connects may not appear. This is an observation, not a channel-busy or admission guarantee.
Recent Operators shows the latest completed call for each ID. Recent Calls also includes earlier calls. Completed group voice calls shorter than three seconds are omitted from these views, Bridges and the Completed live display. An active call resuming on the same TG may initially show zero seconds. Data events and Raw Console remain unfiltered. Talker Alias appears as TA beneath the operator after the over, when reported. Directory callsigns and names remain separate from Talker Alias, which is text reported by the radio, not verified identity. Source server and source repeater/hotspot identify the reported origin, not necessarily this server. Blank fields mean that the report did not supply them. Use Display settings to switch timestamps between local time and UTC. Local time means this browser's timezone, not the server's. Elapsed durations are unchanged. Live duration updates arrive with reports, normally every five seconds, not from a browser stopwatch. Timeslots are shown for RF connections, not network live TGs.
External origin (inferred) means the report explicitly supplied source repeater 0, normally from OBPv1 ingress. The source server then identifies where traffic entered FreeDMR. This is an indicator, not verified classification. Missing origin fields remain Not reported. Neither is hidden from live talkgroups.
Identity details compares a recognisable TA callsign with the directory. TA differs is informational, not proof of a false ID; TA variant indicates a recognised suffix or UK regional-locator variation. Names are compared separately. ID allocation country is inferred from the numeric prefix, not the operator's nationality or present location. UK callsign hints describe recognised formats, not verified licence status. Unknown formats are left unclassified.
Linked source server IDs open the console published in the FreeDMR server directory. A worker may link to its base server's console while retaining its full reported ID. Unlisted, ambiguous or expired entries remain plain text.
Pause updates to read or select text without new reports replacing it. Reception continues; Resume shows the latest report. An offline indicator means the displayed information may be stale. Wide tables scroll horizontally and can be focused with the keyboard.
Reporting live means upstream reports are arriving. Group voice quiet means no active group voice call has been observed; it does not mean that the feed has stopped. Reporting stale means upstream reports have stopped arriving, even if this page still updates. Reporting status unavailable means the browser is no longer receiving the console's status heartbeat.
Appearance and accessibility
The default Radio Day pack uses Automatic day/night, varying the background with your local clock. You can instead choose Dark, Light or System, then Dynamic background, Static background (header accents only), or Standard (no effects). Automatic seasonal colours use your browser timezone as a coarse hemisphere hint, not your location or climate; unknown zones use neutral colours. You or the sysop can select neutral, northern or southern temperate colours explicitly. Saved choices take precedence. High contrast suppresses decoration. Theme preview lets you explore dates and times using sample traffic only. To keep the theme, choose Review and save settings, check the browser storage option, then select Save settings. Leaving without saving keeps your previous preferences. Simulated dates and events are never saved. Event decoration covers calendar dates, not live operating status. New theme labels currently use English fallback.
Display settings also offers Theme pack and Calendar overlay. Choose from packs installed by the sysop, retain Server default, or choose None for no additional calendar. One calendar overlay can accompany the theme's own events. These choices apply immediately and are saved only with explicit Save Settings consent. The same selectors work in Theme preview, where changes never update saved preferences.
Open Display settings to select a light or dark theme, Large text, High contrast, or UTC/local time. Choices are not saved by default. Save settings opens a summary and an explicit opt-in for this browser; you can remove saved display settings there. Without saving, each new page uses defaults. Browser zoom and operating-system contrast settings remain available. Tab moves through controls and links; Enter opens identity or connection details. Escape, the close button or a click outside closes the popover. Reports for that view wait while details are open. Pause updates keeps a report still while you read it. External links, including Network Activity, QRZ and APRS.fi, open in a new tab; local navigation stays in this tab.
Without JavaScript the navigation, guide, licence and settings explanation remain available. Live reports, display controls, the Options Generator and Connection Control require JavaScript.
Hotspots and repeaters
Repeaters & Gateways includes shared RF gateways as well as repeaters. A connection can declare TYPE=hotspot, TYPE=repeater, TYPE=gateway or TYPE=bridge in OPTIONS; sysop rules take precedence. This is display classification only, not a change to slots, admission or routing. The former BRIDGE=1 option is no longer used.
Hotspots and Repeaters use ID conventions, with any exceptions set by the sysop. They do not establish a station's licence or hardware type. All Systems also includes ambiguous and non-radio connections. A Station details link appears where the sysop has supplied one, for example a UK repeater directory entry.
RX and TX slots have steady highlighting as well as text labels; Idle removes the activity highlight. Recent Operators is a separate view of completed calls, rather than the front page.
The Compact equipment grid on Repeaters, Hotspots and All Systems shows callsigns, IDs and slot activity. Active voice shows the TG and directory callsign/name, with the caller's DMR ID underneath. The bottom-right arrow opens connection details and TG subscriptions. View: Detailed shows one table per device in two columns when space permits, otherwise one. Compact tiles fill the available width. Simplex devices show TS2; duplex devices show both slots. Data seen marks a local data report for five seconds, subject to report refresh timing, not a continuing busy session. Generated ident beacons do not currently provide the voice reports required for an activity highlight.
Each slot lists its reported active TG subscriptions: static, dynamic or Dial. For local Dial voice calls, the live destination is the network TG, not the RF-facing TG9. The turn-arrow symbol identifies Dial; its label and tooltip give the RF and network TG numbers. Live TGs use the bridge state reported at call start; connected-device destinations also refresh from later bridge reports. If the mapping is missing or ambiguous, the original TG is shown. Raw Console and stored history retain the original reports; remote Dial use is not inferred.
QRZ and APRS.fi links use the directory callsign, not Talker Alias. An APRS.fi link does not imply that a position is available.
Order: Static keeps the reported device order. Active at top puts RX before TX, then idle devices. A newly idle device keeps its ordering priority for five seconds, without retaining its activity highlight. Sorting waits while you use connection details, select text, or pause updates. These choices are saved only if you opt in to Save Settings.
Known source devices show their directory callsign and SSID, with the complete numeric ID underneath. Server names include their worker number where applicable. Missing directory entries remain numeric. These labels are directory information, not proof of identity.
The National filter selects live TG numbers by the prefixes chosen by the sysop. It does not filter operator nationality or change anything on the network. The prefixes are shown in the filter's tooltip.
Bridges
TG names starting with # or containing the word "bridge" indicate possible external links, not the origin of every call.
Recent Bridge Calls includes marked TGs and TA bridge indications. This is not a verified inventory; TA may arrive only at call end.
Live / Local Bridges shows currently connected HBP peers declared as bridges through OPTIONS or a sysop override. This local classification is separate from talkgroup markers. FreeBridge hides generated internal HDStack links by default; Show internal links reveals them. Inventory-only links do not supply activity, so they are not labelled idle.
Local and global history
This console shows reports observed here, including traffic originating elsewhere on the mesh. Recent Operators and Recent Calls are useful for checking whether this server saw a call; Network Activity combines observations for network-wide searches and statistics. Filtering Network Activity by source server is not the same as selecting everything observed by this server. Neither list proves reception by a radio.
Raw Console
When enabled by the sysop, Tools includes Raw Console: the original text call-log view for debugging. It shows up to 1,000 recent reporting log lines, rather than a packet capture or the Recent Calls table. The rolling history is kept in memory and clears when the console restarts. Pause updates keeps the text still for reading and copying. This view requires JavaScript.
Options and keys
Optional display hint to FreeDMR about the system behind this HBP connection. Not required; does not change routing, admission or slot settings. TYPE is omitted when System type is Not specified and is included in the 255-byte limit when selected.
The Options Generator produces an options string for your MMDVMHost or DMRGateway configuration. It does not apply settings to a connected server. Put the string in the client's Options field and reconnect. Save the generated KEY for Connection Control. Clear options retains this key; Generate new key replaces it.
The complete string must fit within 255 UTF-8 bytes. It is never silently truncated. Blank settings use server defaults. Voice language must be one installed on the server. Do not put a server/system API key here.
Connection Control
Operator Console brings together live talkgroups, your connection's reported slots, Dial controls and recent outbound calls. Configure your exact connected ID, including SSID, inSettings. An optional operator ID narrows the calls shown on a shared repeater. The KEY is needed only for commands; without one you can still view your connection. Settings are not entered on the console page.
RF to Network is traffic received from your equipment; Network to RF is traffic sent towards it. Only locally reported calls matching both the connection ID and system are included in My outbound calls. This is a filter of the current recent-call window, not a separate or complete log. Missing origin fields are not guessed. Talker Alias appears after completion when supplied. Reports do not prove reception at another radio. An ambiguous ID, missing connection, paused view or stale reporting disables console commands. Slot choices follow reported hardware capability; simplex equipment offers TS2 only.
The header Dial panel offers quick controls using your configured connection and selected slot. Its cog opens the full setup; no key entry is needed in the panel. TG turn-arrow buttons link your connection to that TG, not the connection displayed in the report. Without configured credentials they open setup guidance.
The speaker button enables optional spoken results. Linked/unlinked is confirmed only when a newer matching server bridge report arrives. Busy means the RF-side voice check rejected the change. Not confirmed means no matching report arrived within 75 seconds; check before trying again. Commands are never retried automatically.
The fullscreen button in the header enters or leaves fullscreen. You can also use the browser's Escape key.
Use your connected repeater/hotspot DMR ID, including its SSID, and the exact KEY in its options. A missing or incorrect key cannot control the connection. Remember is optional for this browser for 30 days; Forget removes it. Use HTTPS, especially on shared networks.
Choose TS1 or TS2. Link selects a Dial talkgroup; Unlink disconnects Dial. Announce status requests a voice announcement, not a silent status check. Reset Dial restores that slot's configured default immediately. Reset non-Dial timers expires conventional TG timers; it does not remove configured statics. The server retains its RF-busy checks and timer policy.
Get options reads the current string. Set options sends the entire string, including KEY. Changing or omitting KEY may change or remove your access. Reset connection disconnects the peer so it can log in again. Commands are never retried automatically: after a timeout, check what happened before repeating a command.
Talkgroups
Talkgroups are shared network resources, not owned by a user or server. Named talkgroups are conveniences; unnamed talkgroups are valid too. TG Subscriptions shows this server's current subscriptions and Dial selections, not a list of all available talkgroups.
FreeBridge reporting
The view shows links present in the report. An HDStack worker may not report its aggregator's external mesh links; an empty list is not proof of disconnection. Internal gateway links are not worldwide bridges.
My radio schedule
Activity > News and events shows the public calendar. Download one event or the calendar for your current theme. An event with a talkgroup opens Operator Console; check the talkgroup and slot, then choose Join. Opening an event never changes a radio connection on its own.
Open My radio schedule under Tools. Import a dedicated radio .ics file to see the next 30 days. Leave the schedule page open for the ten-minute reminder, or download the file for your calendar application. Files are not uploaded. Saving a schedule on this browser profile requires separate consent. Delete calendar removes the saved copy.
An event with an explicit X-FREEDMR-TG field can open Operator Console. Opening the link does not change a slot. Check your connection and selected slot, then select Join on TG to send the normal Dial command.